Techtop Motors Shipping Locations

We can arrange shipping or free pickup at any of the following Techtop locations, provided stock is available at the desired location.  Contact us if you need to arrange a free local pickup.

Techtop USA Warehouse Locations

 Georgia (Techtop USA Headquarters)
2815 Colonnades Court
 Norcross, GA 30071		 Caldwell Electric
Authorized Distributor
212 Otis Dr
Woodway, TX 76712
254-772-1899
Louisville, KY
260 Park Loop Rd
Shepherdsville, KY 40165		 Oklahoma City, OK
8417 SW 23rd PL
Oklahoma City, OK 73128
Dallas, TX
1523 Crescent Drive
Carrollton, TX 75006		 Houston, TX
5630 Guhn Road # 100
Houston, TX 77040
Odessa, TX
635 Industrial Ave
Odessa, TX 79761		 Phoenix, AZ
West Turney Ste A-1
Phoenix, AZ 85019
Fresno, CA
1816 S. Van Ness Ave
Fresno, CA 93721		 Portland, OR
7615 N. Upland Dr.
Portland, OR 97203
Reno, NV
Southern Way
Sparks, NV 89431		 Cleveland, OH
4540 Glennbrook Dr.
Willoughby, OH 44094
Itasca, IL 
921 Ardmore Ave.
Itasca, IL 60143		 Contact Us for inventory status at any of these locations.

 

Use the Filter Search below to narrow down your search:

788 products

Filter

Show previous products

  • View options

    Techtop Techtop CT3-CI-TO-213T-4-B-D-7.5 TEAO 7.5 HP 1800 RPM 213T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop Cooling Tower motors are specifically built for harsh cooling tower environments. Extreme wet environments require top-notch exterior ingress protection as well as high-performance condensation drain capability. Techtop cooling tower motors have this covered. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CT-213T-CI-TO.step Cooling Tower Line Sheet

    Read more

    Normally ships within 24 hours

    $1,269.48

    View options

  • View options

    Techtop Techtop CT3-CI-TO-184T-4-B-D-5 TEAO 5 HP 1800 RPM 184T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop Cooling Tower motors are specifically built for harsh cooling tower environments. Extreme wet environments require top-notch exterior ingress protection as well as high-performance condensation drain capability. Techtop cooling tower motors have this covered. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CT-184T-CI-TO.step Cooling Tower Line Sheet

    Read more

    Normally ships within 24 hours

    $1,022.61

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56HC-2-B-D-3 TEFC 3 HP 3600 RPM 56HC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56HC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $445.89

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-4-B-D-.5 TEFC 0.5 HP 1800 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $250.71

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-4-B-D-.33 TEFC 0.33 HP 1800 RPM 56C 208-230/460V Three-Phase Motor

    Ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Ships within 24 hours

    $238.37

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-2-B-D-1.5 TEFC 1.5 HP 3600 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $300.86

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-2-B-D-1 TEFC 1 HP 3600 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $287.74

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-2-B-D-.75 TEFC 0.75 HP 3600 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $274.63

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-2-B-D-.5 TEFC 0.5 HP 3600 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $257.66

    View options

  • Techtop Cobra motor

    View options

    Techtop Techtop CB3-AL-TF-56C-2-B-D-.33 TEFC 0.33 HP 3600 RPM 56C 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop's Cobra line are top of the line aluminum 56C frame motors with quality features not found on other brands, including stainless steel fan cover and nameplate, epoxy-potted conduit box entry, and installed shaft grounding brush, making them ideal for VFD use. See the brochure below for all the details. Includes a 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models CB-56C-AL-TF.step

    Read more

    Normally ships within 24 hours

    $245.31

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-445T-6-RR-G-125 TEFC 125 HP 1200 445T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-445T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $10,131.56

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-444T-6-RR-G-75 TEFC 75 HP 1200 444T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-444T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $7,078.35

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-444T-6-RR-G-100 TEFC 100 HP 1200 444T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-444T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $8,549.60

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-405T-6-RR-G-75 TEFC 75 HP 1200 405T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-405T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $5,606.35

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-404T-6-RR-G-60 TEFC 60 HP 1200 404T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-404T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $4,945.78

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-365T-6-BR-G-50 TEFC 50 HP 1200 365T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-365T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $3,913.67

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-364T-6-BR-G-40 TEFC 40 HP 1200 364T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-364T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $3,516.14

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-326T-6-BR-G-30 TEFC 30 HP 1200 326T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-326T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $2,788.69

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-324T-6-BR-G-25 TEFC 25 HP 1200 324T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-324T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $2,285.64

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-286T-6-BR-G-20 TEFC 20 HP 1200 286T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-286T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $1,848.72

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-284T-6-BR-G-15 TEFC 15 HP 1200 284T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-284T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $1,674.85

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-256T-6-BR-G-10 TEFC 10 HP 1200 256T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-256T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $1,288.59

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-254T-6-BR-G-7.5 TEFC 7.5 HP 1200 254T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-254T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $1,079.17

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-215T-6-B-G-5 TEFC 5 HP 1200 215T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-215T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $819.31

    View options

  • Techtop Oil Pumper Motor

    View options

    Techtop Techtop BK3-CI-TF-213T-6-B-G-3 TEFC 3 HP 1200 213T Oil Pump Motor

    Normally ships within 24 hours

    Techtop Oil Pumper motors are engineered specifically for high inertia starting loads, such as oil pumps and cranes. NEMA Design code 'D' allow for higher 'slip' while boosting starting torque. Spec Sheets 230/460V-60Hz398/796V-60Hz 3D Models BK-213T-CI-TF.step Techtop Oil Pumper Motor Line Card

    Read more

    Normally ships within 24 hours

    $658.81

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-215TC-6-B-D-5 TEFC 5 HP 1200 RPM 215TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-215TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $1,039.56

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-215TC-2-B-D-10 TEFC 10 HP 3600 RPM 215TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-215TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $925.65

    View options

  • Techtop GX3 motor

    View options

    Techtop Techtop GX3-AL-TF-215T-6-B-D-5 TEFC 5 HP 1200 RPM 215T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-215T-AL-TF.step

    Read more

    Normally ships within 24 hours

    $978.99

    View options

  • Techtop GX3 motor

    View options

    Techtop Techtop GX3-AL-TF-215T-4-B-D-10 TEFC 10 HP 1800 RPM 215T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-215T-AL-TF.step

    Read more

    Normally ships within 24 hours

    $924.47

    View options

  • Techtop GX3 motor

    View options

    Techtop Techtop GX3-AL-TF-215T-2-B-D-10 TEFC 10 HP 3600 RPM 215T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-215T-AL-TF.step

    Read more

    Normally ships within 24 hours

    $888.13

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-213TC-6-B-D-3 TEFC 3 HP 1200 RPM 213TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-213TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $822.26

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-213TC-4-B-D-7.5 TEFC 7.5 HP 1800 RPM 213TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-213TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $888.13

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-213TC-2-B-D-7.5 TEFC 7.5 HP 3600 RPM 213TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-213TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $877.53

    View options

  • Techtop GX3 motor

    View options

    Techtop Techtop GX3-AL-TF-213T-6-B-D-3 TEFC 3 HP 1200 RPM 213T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-213T-AL-TF.step

    Read more

    Normally ships within 24 hours

    $750.33

    View options

  • Techtop GX3 motor

    View options

    Techtop Techtop GX3-AL-TF-213T-2-B-D-7.5 TEFC 7.5 HP 3600 RPM 213T 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-213T-AL-TF.step

    Read more

    Normally ships within 24 hours

    $774.56

    View options

  • Techtop GX3 C-face motor

    View options

    Techtop Techtop GX3-AL-TF-184TC-6-B-D-2 TEFC 2 HP 1200 RPM 184TC 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    The Techtop GX3 line of aluminum frame motors are very popular due to their light weight, excellent construction and included internal shaft grounding brush. The shaft grounding brush makes this motor an excellent choice for use with a VFD drive, as the grounding brush will help protect the bearings from early failure due to electrical-discharge machining (EDM) wear. Removable feet and movable terminal box allows mounting in a variety of positions. 36-month warranty from purchase date. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GX-184TC-AL-TF.step

    Read more

    Normally ships within 24 hours

    $643.57

    View options

You have seen 756 out of 788 products

Show more products

© 2026 Caldwell Electric, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account