Accessories for variable-speed motor drives.
Drive Accessories
-
WEG Weg CFW100-CCAN CANopen DeviceNet Module
The Weg CFW100-CCAN communications module supports both CANopen and DeviceNet communication over a 5-wire connector. The following table outlines the connector pinout: CAN Connector Pinout Pin Def. Description 6 V(-) Negative Power Supply 7 CAN_L Comms signal CAN_L 8 Shield Cable Shield 9 CAN_H Comms signal CANL_H 10 V(+) Positive Power Supply Weg EDS files are freely available to download for CANopen and DeviceNet configurations. See links on the Documents section below. Documentation Weg-CCAN Installation Guide Weg-CANopen Manual Weg-CCAN DeviceNet Manual Weg CANopen EDS Configuration File Weg DeviceNet EDS Configuration File
$113.49
-
WEG Weg CFW300-CETH Ethernet Module
The Weg CFW300-CETH Ethernet module provides 100BASE-TX Ethernet in half or full-duplex mode and provides a built-in HTTP Web server for configuration and parameterization of the drive. Contains a two-port ethernet switch, and can operate as a ModBus TCP server. A Weg EDS file is freely available to download for network master configuration. Documentation Weg-CETH Ethernet User Manual Operation on Modbus TCP network using PLC300 Operation on Ethernet IP Network Using Rockwell Controllogix PLC Weg CETH EDS Configuration File
$169.12
-
WEG Weg CFW300-CPDP Profibus Module
NOTE: This product has been replaced by the CFW320-CPDP. The CFW300 line is no longer available. Please search for the CFW320 series of products. The Weg CFW300-CPDP module provides Profibus DP communications to the CFW300 VFD. The module has a standard DB-9 style connector. Profibus signal termination is selectable with DIP switches. A Weg EDS configuration is freely available to download. See our link in the Documentation section below. Documentation Weg-CPDP Profibus User Guide Weg-CPDP PRofibus EDS Configuration File
$177.58
-
WEG Weg CFW300-CRS232 RS-232 ModBus-RTU Module
The Weg CFW300-CRS232 module provides standard RS-232 3-wire communications to the CFW300 VFD. Documentation Weg-CRS232 Installation Guide
$49.53
-
WEG Weg CFW300-CRS485 RS-485 Module
The Weg CFW300-CRS485 module provides standard RS-485 over-the-wire communications to the CFW300 VFD. The VFD can be commanded and monitored by means of the WPS software. RS-485 termination is dip-switch settable on the module. Documentation Weg-CRS485 Installation Guide
$49.53
-
WEG Weg CFW300-CUSB USB Module
The Weg CFW300-CUSB module provides USB V2.0 communications to the CFW300 VFD. Programming, parameter setting, and monitoring can be done using the supplied module and cable, connected to a computer running the free Weg WPS software. The module includes a USB cable with a mini-USB connector on the drive end, and a standard USB Type A connector on the computer end. Documentation Weg-CUSB Installation Guide
$52.55
-
WEG Weg CFW300-IOADR IO Infrared Module
The Weg CFW300-IOADR module provides a wireless infrared remote control for the CFW300 VFD. The kit includes the IOADR module, the infrared remote control, and a 2-meter cable between the module and IR sensor. The Infrared Remote contains a total of 6 function keys. A remote with display is also available as model CFW300-IOADR-D. The function of the keys are listed below: IOADR Remote Control Functions Key Description Power Start/Stop motor Down Browse display up Up Browse display down Cycle Change view between P842 and P843 P Confirm/Program parameter on CFDW300 display Blue Programmable Function 1 White Programmable Function 2 Red Programmable Function 3 The IOADR module also contains 3 NO (Normally Open) Relay contacts good for up to 5 Amps. Documentation Weg-IOADR Installation Guide
$125.03
-
WEG Weg CFW300-IOADR-D IO IR Module
The Weg CFW300-IOADR-D module provides a wireless infrared remote control and display for the CFW300 VFD. The kit includes the IOADR-D module, the infrared remote control with display, and a 2-meter cable between the module and IR sensor. Maximum distancebetween the sensor and the remote is 8 meters. The Infrared Remote and display contains a total of 10 keys. The function of the keys are listed below: IOADR Remote Control with Display Functions Key Description * Send a command to enable/disable the COOL and UVC funtions Func Send command to enable/disable special function. Mode Send command to change operating mode between AUTO and MAN Swing Send command to enable/disable the SWING function Timer Send command to enable timers 01 - 02 -03 Clean Send command to enable/disable the CLEAN function (cycle) Send command to enable/disable the DRY function Up Increments and sends percentage/temperature values Down Decrements and sends percentage/temperature values Power Sends ON/OFF commands. Press and Hold 5 seconds toggles temp. units from °F to °C. The IOADR module also contains 3 NO (Normally Open) Relay contacts good for up to 5 Amps. Documentation Weg-IOADR-D Installation Guide
$147.98
-
WEG Weg CFW300-IOAENC IO Encoder Module
The Weg CFW300-IOAENC module provides an encoder input with A,B Quadrature signals at max frequency of 400 kHz. The module also provides 1 Analog voltage input, 1 analog current input, 2 analog outputs, +10VDC reference, and +5VDC for powering an encoder. Documentation Weg-IOENC Installation Guide
$86.37
-
WEG Weg CFW300-IOAR IO Expansion Module
The Weg CFW300-IOAR module is an I/O Expansion module consisting of 1 Analog Input, 1 Analog Output, 3 Digital Relay outputs rated up to 5 Amps each, and +10VDC power. The module IO expansion is in addition to the built-in CFW300 I/O which includes 4 Digital Inputs, 1 Analog In, 1 Analog Out, and 1 Relay out. Documentation Weg-IOAR Installation Guide
$85.16
-
WEG Weg CFW300-IODF IO Digital Frequency Module
The Weg CFW300-IODF provides digital frequency inputs and outputs for the CFW300 series VFDs. The module consists of 3 NPN transistor inputs, and 3 optocoupled open-collector transistor outputs. The frequency range is from 10 to 3000 Hz. The frequency inputs and output values are only accessible by means of a SoftPLC application running on the CFW300 VFD. Documentation Weg-IODF Installation Guide
$69.46
-
WEG Weg CFW300-IODR IO Expansion Module
The Weg CFW300-IODR module is a Digital I/O Expansion module consisting of 4 Digital Inputs and 3 output relay contacts rated up to 5 Amps each. is a remote keypad kit for the CFW300 series VFD. The module IO expansion is in addition to the built-in CFW300 I/O which includes 4 Digital Inputs, 1 Analog In, 1 Analog Out, and 1 Relay out. Documentation Weg-IODR Installation Guide
$65.23
-
WEG Weg CFW320-IOP Potentiometer Module
The Weg CFW320-IOP module is a front-panel potentiometer for controlling the speed or other input to a WEG CFW320 series VFD. Documentation Weg-IOP Installation Guide
$54.36
-
WEG Weg CFW300-KFA-S1-S2 RFI Single-Phase Frame Size A Kit
The Weg CFW300-KFA provides RFI filtering for the single-phase versions of the CFW300 in frame size A. Reduces electromagnetic interference. Documentation Weg-KFA Installation Guide
$54.36
-
WEG Weg CFW300-KFB-S2 RFI Single-Phase Frame Size B Kit
The Weg CFW300-KFB provides RFI filtering for the single-phase versions of the CFW300 in frame size B. Reduces electromagnetic interference. Documentation Weg-KFB Installation Guide
$63.42
-
WEG Weg CFW300-KHMIR Remote Keypad Kit
The Weg CFW300-KHMIR is a remote keypad kit for the CFW300 series VFD. The kit contains the CFW300-CRS485 module, remote HMI keypad/display, and a 3-meter USB cable. Documentation Weg-KHMIR Installation Guide
$154.62
-
WEG Weg CFW100-CRS485 I/O RS-485 Module
The Weg CRS485 module provides standard RS-485 over-the-wire communications with VFD. The VFD can be commanded and monitored by means of the WPS software. RS-485 termination is dip-switch settable on the module. Modbus-RTU protocol is supported. Documentation Weg-CRS485 Installation Guide Weg Modbus RTU Manual
$47.72
-
WEG Weg CFW100-CUSB I/O USB Module
The Weg CUSB module provides USB V2.0 communications with the VFD. Programming, parameter setting, and monitoring can be done using the supplied module and cable, connected to a computer running the free Weg WPS software. The module includes a USB cable with a mini-USB connector on the drive end, and a standard USB Type A connector on the computer end. Documentation Weg-CUSB Installation Guide
$50.63
-
WEG Weg CFW100-IOA I/O Expansion Module
The Weg IOA module provides 1 analog input, 1 analog output, and a +10VDC reference for a potentiometer. The analog input and output are DIP switch configurable as either 0-10V voltage-mode or 4-20mA current-mode. Documentation Weg-IOA Installation Guide
$57.62
-
WEG Weg CFW100-IOADR I/O IR Expansion Module
The Weg IOADR module provides a wireless infrared remote control for the VFD. The kit includes the IOADR module, the infrared remote control, and a 2-meter cable between the module and IR sensor. The IOADR module provides 1 analog input (voltage or current), a +10VDC reference, and 3 relay outputs rated at 0.5 Amp. Documentation Weg-IOADR Installation Guide
$120.47
-
WEG Weg CFW100-IOAR I/O Expansion Module
The Weg IOAR module provides 1 analog input, 1 relay output, and a +10VDC reference for a potentiometer. The analog input is DIP switch settable between 0-10VDC voltage mode, or 4-20mA current mode. Documentation Weg-IOAR Installation Guide
$47.14
-
WEG Weg CFW100-IOD I/O Digital Input Module
The Weg IOD module provides 4 digital isolated inputs. The module consists of 4 transistor inputs configurable as NPN or PNP type, with max. input voltage of 30VDC. Documentation Weg-IOD Installation Guide
$47.72
-
WEG Weg CFW100-IODR I/O Encoder Module
The Weg IODR module provides 3 isolated digital inputs, 3 relay outputs, and an encoder input and a +5VDC supply. Documentation Weg-IODR Installation Guide
$128.04
-
WEG Weg CFW100-IOP Potentiometer Module
The Weg IOp module provides a potentiomenter for setting frequency,speed or other parameters. Documentation Weg-IOP Installation Guide
$52.38
You have seen 24 out of 69 products