WEG CFW300 VFD AC Drives

The Weg CFW300-CETH Ethernet module provides 100BASE-TX Ethernet in half or full-duplex mode and provides a built-in HTTP Web server for configuration and parameterization of the drive. Contains a two-port ethernet switch, and can operate as a ModBus TCP server. A Weg EDS file is freely available to download for network master configuration. Documentation Weg-CETH Ethernet User Manual Operation on Modbus TCP network using PLC300 Operation on Ethernet IP Network Using Rockwell Controllogix PLC Weg CETH EDS Configuration File

Read more less

The Weg CFW300-CRS485 module provides standard RS-485 over-the-wire communications to the CFW300 VFD. The VFD can be commanded and monitored by means of the WPS software. RS-485 termination is dip-switch settable on the module. Documentation Weg-CRS485 Installation Guide

Read more less

The Weg CFW300-CUSB module provides USB V2.0 communications to the CFW300 VFD. Programming, parameter setting, and monitoring can be done using the supplied module and cable, connected to a computer running the free Weg WPS software. The module includes a USB cable with a mini-USB connector on the drive end, and a standard USB Type A connector on the computer end. Documentation Weg-CUSB Installation Guide

Read more less

The Weg CFW300-IOADR module provides a wireless infrared remote control for the CFW300 VFD. The kit includes the IOADR module, the infrared remote control, and a 2-meter cable between the module and IR sensor. The Infrared Remote contains a total of 6 function keys. A remote with display is also available as model CFW300-IOADR-D. The function of the keys are listed below: IOADR Remote Control Functions Key Description Power Start/Stop motor Down Browse display up Up Browse display down Cycle Change view between P842 and P843 P Confirm/Program parameter on CFDW300 display Blue Programmable Function 1 White Programmable Function 2 Red Programmable Function 3 The IOADR module also contains 3 NO (Normally Open) Relay contacts good for up to 5 Amps. Documentation Weg-IOADR Installation Guide

Read more less

The Weg CFW300-IOADR-D module provides a wireless infrared remote control and display for the CFW300 VFD. The kit includes the IOADR-D module, the infrared remote control with display, and a 2-meter cable between the module and IR sensor. Maximum distancebetween the sensor and the remote is 8 meters. The Infrared Remote and display contains a total of 10 keys. The function of the keys are listed below: IOADR Remote Control with Display Functions Key Description * Send a command to enable/disable the COOL and UVC funtions Func Send command to enable/disable special function. Mode Send command to change operating mode between AUTO and MAN Swing Send command to enable/disable the SWING function Timer Send command to enable timers 01 - 02 -03 Clean Send command to enable/disable the CLEAN function (cycle) Send command to enable/disable the DRY function Up Increments and sends percentage/temperature values Down Decrements and sends percentage/temperature values Power Sends ON/OFF commands. Press and Hold 5 seconds toggles temp. units from °F to °C. The IOADR module also contains 3 NO (Normally Open) Relay contacts good for up to 5 Amps. Documentation Weg-IOADR-D Installation Guide

Read more less

The Weg CFW300-IOAENC module provides an encoder input with A,B Quadrature signals at max frequency of 400 kHz. The module also provides 1 Analog voltage input, 1 analog current input, 2 analog outputs, +10VDC reference, and +5VDC for powering an encoder. Documentation Weg-IOENC Installation Guide

Read more less

The Weg CFW300-IOAR module is an I/O Expansion module consisting of 1 Analog Input, 1 Analog Output, 3 Digital Relay outputs rated up to 5 Amps each, and +10VDC power. The module IO expansion is in addition to the built-in CFW300 I/O which includes 4 Digital Inputs, 1 Analog In, 1 Analog Out, and 1 Relay out. Documentation Weg-IOAR Installation Guide

Read more less

The Weg CFW300-IODF provides digital frequency inputs and outputs for the CFW300 series VFDs. The module consists of 3 NPN transistor inputs, and 3 optocoupled open-collector transistor outputs. The frequency range is from 10 to 3000 Hz. The frequency inputs and output values are only accessible by means of a SoftPLC application running on the CFW300 VFD. Documentation Weg-IODF Installation Guide

Read more less

The Weg CFW300-IODR module is a Digital I/O Expansion module consisting of 4 Digital Inputs and 3 output relay contacts rated up to 5 Amps each. is a remote keypad kit for the CFW300 series VFD. The module IO expansion is in addition to the built-in CFW300 I/O which includes 4 Digital Inputs, 1 Analog In, 1 Analog Out, and 1 Relay out. Documentation Weg-IODR Installation Guide

Read more less

The Weg CFW300-KFA provides RFI filtering for the single-phase versions of the CFW300 in frame size A. Reduces electromagnetic interference. Documentation Weg-KFA Installation Guide

Read more less

The Weg CFW300-KFB provides RFI filtering for the single-phase versions of the CFW300 in frame size B. Reduces electromagnetic interference. Documentation Weg-KFB Installation Guide

Read more less

  The Weg CFW300-KHMIR is a remote keypad kit for the CFW300 series VFD. The kit contains the CFW300-CRS485 module, remote HMI keypad/display, and a 3-meter USB cable. Documentation Weg-KHMIR Installation Guide

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

The Weg CFW300 series AC Drive for 3-phase induction motors is a compact, cost-effective VFD for a variety of applications. The drive features a compact IEC DIN-Rail mountable frame with contactor-style connections (top in / bottom out). The CFW300 product range includes single-phase 120 or 230 VAC input up to 3 HP, as well as 3-phase 240VAC input up to 5 HP. Features DIN-Rail Form Factor Easily replace contactor/overlaod setup with VFD. Built-In Motor Protection Protects motor from overload/overcurrent, overvoltage, phase-loss, and more SoftPLC Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller PID mode provides closed loop process control from pressure, flow, or other input. 2-Slots for Options Large variety of communications and I/O Option Modules available Conformal-Coated Circuit Boards Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Documentation CFW300 Users Manual CFW300 Brochure CFW300 Programming Manual CFW300 Quick Installation Guide CFW300 Quick Parameter Reference

Read more less

  The Weg CFW320-IOP module is a front-panel potentiometer for controlling the speed or other input to a WEG CFW320 series VFD. Documentation Weg-IOP Installation Guide

Read more less