Weg CFW500 VFD AC Drives

The Weg CFW500 VFD is designed with a large choice of plug-and-play options, including most communication buses. Available in both single-phase input up to 3 HP,  3-phase 240V up to 75 HP and 460V up to 175 HP.  NEMA 4X / IP66 versions are also available up to 25 HP. 

Features

  • Built-In programmable Soft-PLC for advanced control scenarios
  • IP20 Enclosure with optional NEMA 1 kit  (IP66 / NEMA 4X also available)
  • 200-240V, 380-480V, or 500-600 input voltages
  • 0 to 500 Hz output frequency
  • 2.5 to 15kHz adjustable carrier frequency
  • 4 isolated digital inputs built-in (more available as options)
  • 1 NC/NO  relay output up to 240VAC 0.5Amp
  • 1 Transistor output
  • 1 isolated analog input
  • 1 isolated analog output

 

101 products

Filter

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR01M 1 Meter Remote Display Cable

    Ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Ships within 24 hours

    $13.89

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1A Protection Kit

    Normally ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg KN1A-E Installation Guide

    Read more

    Normally ships within 24 hours

    $16.91

    View options

  • Weg CFW500-RHMIF mounting kit for HMI-01 advanced display

    View options

    WEG Weg CFW500-RHMIF HMI Keypad Mounting Kit

    Ships within 24 hours

    The Weg CFW500-RHMIF mounting kit is used to mount the HMI-01 remote advanced display and keypad. It includes a mounting frame, gasket and screws. Documentation Weg-RHMIF Installation Guide

    Read more

    Ships within 24 hours

    $17.85

    View options

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR02M 2 Meter Remote Display Cable

    Normally ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Normally ships within 24 hours

    $18.72

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1B Protection Kit

    Ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg KN1A-E Installation Guide

    Read more

    Ships within 24 hours

    $19.93

    View options

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR03M 3 Meter Remote Display Cable

    Normally ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Normally ships within 24 hours

    $24.76

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSA Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $24.76

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1C Protection Kit

    Ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg KN1A-E Installation Guide

    Read more

    Ships within 24 hours

    $26.58

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSB Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $26.58

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSC Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $27.78

    View options

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR05M 5 Meter Remote Display Cable

    Ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Ships within 24 hours

    $30.80

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSD Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $30.80

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1D Protection Kit

    Ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg KN1A-E Installation Guide

    Read more

    Ships within 24 hours

    $35.64

    View options

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR075M 7.5 Meter Remote Display Cable

    Ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Ships within 24 hours

    $36.84

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1E Protection Kit

    Ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg KN1A-E Installation Guide

    Read more

    Ships within 24 hours

    $38.66

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSE Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $38.66

    View options

  • Weg CFW500-CCHMIR Remote Keypad Cable

    View options

    WEG Weg CFW500-CCHMIR010M 10 Meter Remote Display Cable

    Normally ships within 24 hours

    The WEG CCHMIR cable connects a remote HMI-01 advanced text display to CFW500 G2 VFDs over an RS-485 link. It can work with any I/O module that includes RS-485 including the standard IOS I/O module. The HMI-01 advanced display keypad only works with gen 2 (G2) CFW500 models. Documentation HMI Remote Display Installation Guide

    Read more

    Normally ships within 24 hours

    $43.49

    View options

  • Weg CFW500-IOS Standard I/O Module

    View options

    WEG Weg CFW500-IOS Standard IO Module

    Normally ships within 24 hours

    The Weg IOS is the standard I/O module shipped with the CFW500 VFDs. I/O capabilities are detailed in the table below: CFW500 IOS I/O FUNCTION QTY Digital Inputs (isoloated) 4 Analog Inputs 1 Analog Outputs 1 Relay Outputs (COM,NO,NC) 1 Digital Transistor Outputs 1 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-IOS Installation Guide CFW500 ModBus RTU Manual CFW500 BACNet Manual

    Read more

    Normally ships within 24 hours

    $66.44

    View options

  • Weg CFW500 I/O Module

    View options

    WEG Weg CFW500-IOR-B IO Relay Module

    Normally ships within 24 hours

    The Weg IOR-B is a digital relay output module for CFW500 VFDs. I/O capabilities are detailed in the table below: CFW500 IOR-B I/O FUNCTION QTY Digital Inputs (isoloated) 5 Analog Inputs 1 Analog Outputs 1 Relay Outputs (COM,NO,NC) 1 Relay Outputs (COM,NO) 3 Digital Transistor Outputs 1 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-IOR Module Installation Guide Weg-IOR-B-PNP Installation Guide

    Read more

    Normally ships within 24 hours

    $75.50

    View options

  • Weg CFW500-CCAN CANopen Module

    View options

    WEG Weg CFW500-CCAN CANopen DeviceNet Module

    Normally ships within 24 hours

    The Weg CFW500-CCAN communications module supports both CANopen and DeviceNet communication over a 5-wire connector. The following table outlines the connector pinout: CAN Connector Pinout Pin Def. Description 6 V(-) Negative Power Supply 7 CAN_L Comms signal CAN_L 8 Shield Cable Shield 9 CAN_H Comms signal CANL_H 10 V(+) Positive Power Supply Weg EDS files are freely available to download for CANopen and DeviceNet configurations. See links on the Documents section below. Documentation Weg-CCAN Installation Guide CFW500 DeviceNet Manual CFW500 CANOpen V38x EDS Configration File CFW500 DeviceNet V38x EDS Configration File

    Read more

    Normally ships within 24 hours

    $83.35

    View options

  • Weg CFW500-CRS232 RS-232 Module

    View options

    WEG Weg CFW500-CRS232 RS-232 Module

    Normally ships within 24 hours

    The Weg CRS232 module provides RS-232 communications over a DB9 connector. This plug-in is used in to CFW500 Universal Asynchronous Receiver Transmitter (UART) interface in RS232 physical layer. The CFW500-CRS232 allows the PC serial communications for inverter commands, reference and variables monitoring, as well as SoftPLC debugging and programming. Modbus RTU protocol is supported. CFW500-CRS232 I/O FUNCTION QTY Digital Inputs (isoloated) 2 Analog Inputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 DB9 Serial Port 1 +24VDC 1 Documentation Weg-CRS232 Module Install Guide CFW500 ModBus RTU Manual

    Read more

    Normally ships within 24 hours

    $83.35

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSF Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $84.56

    View options

  • Weg CFW500-SFY2 Safety Module

    View options

    WEG Weg CFW500-SFY2 Safety Off Module

    Ships within 24 hours

    The Weg CFW500-SFY2 is a safe-torque off (STO) optional safety module for the CFW500 VFDs. It provide two standardized safety functions: Safe torque off (STO) according to IEC/EN 61800-5-2 or Stop category 0 according to IEC/EN 60204-1. Safe stop 1 time controlled (SS1-t) according to IEC/EN 61800-5-2 or Stop category 1 according to IEC/EN 60204-1. The SFY2 is only compatible with Gen 2 (G2) CFW500 VFDs. Documentation Weg-SFY2 Installation Guide

    Read more

    Ships within 24 hours

    $84.56

    View options

  • Weg CFW500 I/O Module

    View options

    WEG Weg CFW500-IOD IO Expansion Module

    Normally ships within 24 hours

    The Weg IOD I/O expansion module provides digital inputs and outputs as detailed in the table below: CFW500 IOD I/O FUNCTION QTY Digital Inputs (isoloated) 8 Analog Inputs 1 Analog Outputs 1 Relay Outputs (COM,NO,NC) 1 Digital Transistor Outputs 4 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW-IOD Installation Guide

    Read more

    Normally ships within 24 hours

    $85.16

    View options

  • Weg CFW500-CRS485-B RS-485 Module

    View options

    WEG Weg CFW500-CRS485-B RS-485 Module

    Ships within 24 hours

    The Weg CRS485-B module provides 2 RS485 ports, in addition to other I/O, as detailed in the table below. The RS485 interfaces support remote control and monitoring via the WLP and WRS software, as well as ModBus RTU, and BACnet protocols. CFW500 CRS485-B I/O FUNCTION QTY Digital Inputs (isoloated) 4 Analog Inputs 2 Relay Outputs (SPDT) 2 Digital Transistor Outputs 1 RS485 Ports 2 +10VDC Ref 1 +24VDC 1 Documentation Weg-CRS485-B Installation Guide CFW500 ModBus RTU Manual CFW500 BACNet Manual

    Read more

    Ships within 24 hours

    $86.37

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1F Protection Kit

    Ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg-KN1F-G Installation Guide

    Read more

    Ships within 24 hours

    $99.66

    View options

  • Weg CFW500-HMIR Remote Display Unit

    View options

    WEG Weg CFW500-HMIR Remote Display Unit

    Ships within 24 hours

      The Weg HMIR is a remote standard display and keypad for the CFW500 VFDs. It interfaces to any of the standard CFW500 I/O with RS-485. The CFW500-CCHMIRxxxM cable is needed for remote mounting. For advanced display with text and keypad, see the HMI-01 unit. See our CFW500 Remote Displays and Options page for all remote mounting options and comparisons. Documentation CFW500-HMIR Installation Guide

    Read more

    Ships within 24 hours

    $102.08

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSG Cable Shielding Kit

    Normally ships within 24 hours

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    Normally ships within 24 hours

    $108.72

    View options

  • Weg CFW500 I/O Module

    View options

    WEG Weg CFW500-IOAD IO Expansion Module

    Normally ships within 24 hours

    The Weg IOAD I/O expansion module provides analog and digital inputs and outputs as detailed in the table below: CFW500 IOAD I/O FUNCTION QTY Digital Inputs (isoloated) 6 Analog Inputs 3 Analog Outputs 2 Relay Outputs (NO/NC) 1 Digital Transistor Outputs 3 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-IOAD Installation Guide

    Read more

    Normally ships within 24 hours

    $109.93

    View options

  • Weg CFW500-MMF Flash Memory Copy Module

    View options

    WEG Weg CFW500-MMF Flash Memory Copy Module

    Normally ships within 24 hours

    The Weg CFW500-MMF memory copy module provides a simple means to copy VFD parameters from one drive to the next. It is battery powered and the drive should not be powered on during use. Documentation Weg-MMF Installation Guide

    Read more

    Normally ships within 24 hours

    $114.16

    View options

  • Weg CFW500-CUSB USB Module

    View options

    WEG Weg CFW500-CUSB USB Module

    Normally ships within 24 hours

    The Weg CUSB module provides USB V2.0 communications with the VFD. Programming, parameter setting, and monitoring can be done using the supplied module and cable, connected to a computer running the free Weg WPS software. The module includes a USB cable with a mini-USB connector on the drive end, and a standard USB Type A connector on the computer end. It also supports Modbus RTu protocols. CFW500 CUSB I/O FUNCTION QTY Digital Inputs (isoloated) 4 Analog Inputs 1 Analog Outputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 Mini-USB Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-CUSB Installation Guide CFW500 ModBus RTU Manual

    Read more

    Normally ships within 24 hours

    $126.84

    View options

  • Weg CFW500-ENC Encoder Module

    View options

    WEG Weg CFW500-ENC Encoder Module

    Normally ships within 24 hours

    The Weg ENC encoder module provides 2 differential channels for encoder inputs up to 400 kHz. It also features configurable +5V or +12V output supply to support quadrature encoder operation. CFW500 ENC I/O FUNCTION QTY Digital Inputs (isoloated) 5 Analog Inputs 1 Analog Outputs 1 Relay Outputs (NO) 3 Digital Transistor Outputs 1 RS485 Ports 1 Quadrature A/*A Inputs 2 VE +5VDC/+12VDC 1 +24VDC 1 Documentation CFW500-ENC Installation Guide

    Read more

    Normally ships within 24 hours

    $126.84

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1G Protection Kit

    Normally ships within 24 hours

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg-KN1F-G Installation Guide

    Read more

    Normally ships within 24 hours

    $129.86

    View options

  • Weg HMI-01 Advanced Text Display / Keypad Unit

    View options

    WEG Weg HMI-01 Advanced Text Display / Keypad Unit

    Normally ships within 24 hours

     The Weg HMI-01 is a remote advanced text display and keypad for the newest line of WEG VFDs, including the CFW500-Gen2, and CFW11. It interfaces to any of the standard I/O  modules with RS-485.    Features Readable text descriptions of parameters and other settings Battery-backed storage of drive parameters and setup Real-Time battery-backed clock for tagging of events and faults WEG Product Code: 15578295 The RHMIF Remote mounting frame and CCHMIRxxxM cable is needed for remote mounting. For the standard display and keypad see the CFW500-RHMIF unit. See our CFW500 Remote Displays and Options page for all remote mounting options and comparisons. Documentation HMI-01 Installation Guide

    Read more

    Normally ships within 24 hours

    $150.85

    View options

  • Weg CFW500-CPDP ProfiBus Module

    View options

    WEG Weg CFW500-CPDP Profibus Module with DB9 Connector

    Normally ships within 24 hours

    The Weg CPDP module supports Profibus protocols using a DB9 style connector CFW500-CPDP I/O FUNCTION QTY Digital Inputs (isoloated) 2 Analog Inputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 DB9 ProfiBus Port 1 +24VDC 1 Documentation CFW500 Profibus DP Manual CFW500-CPDP Profibus Module Install Guide Profibus DP Module GSDML V2.3 XML File Profibus DP EDD and GSD files

    Read more

    Normally ships within 24 hours

    $244.62

    View options

  • Weg CFW500-CPDP2 ProfiBus Module

    View options

    WEG Weg CFW500-CPDP2 Profibus Module

    Normally ships within 24 hours

    The Weg CPDP2 module provides Profibus protocols using bare wire screw terminal connections. CFW500-CPDP2 I/O FUNCTION QTY Digital Inputs (isoloated) 2 Analog Inputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 Profibus Terminals 1 +24VDC 1 Documentation CFW500 Profibus DP Manual CFW500-CPDP Profibus Module Install Guide Profibus DP Module GSDML V2.3 XML File Profibus DP EDD and GSD files

    Read more

    Normally ships within 24 hours

    $268.78

    View options

You have seen 36 out of 101 products

Show more products

© 2026 Caldwell Electric, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account