Weg CFW500 VFD AC Drives

102 products

Filter

Show previous products

  • Weg CFW500 I/O Module

    View options

    WEG Weg CFW500-IOD IO Expansion Module

    The Weg IOD I/O expansion module provides digital inputs and outputs as detailed in the table below: CFW500 IOD I/O FUNCTION QTY Digital Inputs (isoloated) 8 Analog Inputs 1 Analog Outputs 1 Relay Outputs (COM,NO,NC) 1 Digital Transistor Outputs 4 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW-IOD Installation Guide

    Read more

    $85.16

    View options

  • Weg CFW500-CRS485-B RS-485 Module

    View options

    WEG Weg CFW500-CRS485-B RS-485 Module

    Delivery within 48 hours, pay afterwards

    The Weg CRS485-B module provides 2 RS485 ports, in addition to other I/O, as detailed in the table below. The RS485 interfaces support remote control and monitoring via the WLP and WRS software, as well as ModBus RTU, and BACnet protocols. CFW500 CRS485-B I/O FUNCTION QTY Digital Inputs (isoloated) 4 Analog Inputs 2 Relay Outputs (SPDT) 2 Digital Transistor Outputs 1 RS485 Ports 2 +10VDC Ref 1 +24VDC 1 Documentation Weg-CRS485-B Installation Guide CFW500 ModBus RTU Manual CFW500 BACNet Manual

    Read more

    Delivery within 48 hours, pay afterwards

    $86.37

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1F Protection Kit

    Delivery within 48 hours, pay afterwards

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg-KN1F-G Installation Guide

    Read more

    Delivery within 48 hours, pay afterwards

    $99.66

    View options

  • Weg CFW500-HMIR Remote Display Unit

    View options

    WEG Weg CFW500-HMIR Remote Display Unit

    Delivery within 48 hours, pay afterwards

      The Weg HMIR is a remote standard display and keypad for the CFW500 VFDs. It interfaces to any of the standard CFW500 I/O with RS-485. The CFW500-CCHMIRxxxM cable is needed for remote mounting. For advanced display with text and keypad, see the HMI-01 unit. See our CFW500 Remote Displays and Options page for all remote mounting options and comparisons. Documentation CFW500-HMIR Installation Guide

    Read more

    Delivery within 48 hours, pay afterwards

    $102.08

    View options

  • Weg CFW500 KPCS Cable Clamp Kit

    View options

    WEG Weg CFW500-KPCSG Cable Shielding Kit

    The WEG KPCSx is a cable clamp and shield kit for the CFW500 VFDs frame size A through G. Documentation Weg-KPCS Installation Guide

    Read more

    $108.72

    View options

  • Weg CFW500 I/O Module

    View options

    WEG Weg CFW500-IOAD IO Expansion Module

    The Weg IOAD I/O expansion module provides analog and digital inputs and outputs as detailed in the table below: CFW500 IOAD I/O FUNCTION QTY Digital Inputs (isoloated) 6 Analog Inputs 3 Analog Outputs 2 Relay Outputs (NO/NC) 1 Digital Transistor Outputs 3 RS485 Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-IOAD Installation Guide

    Read more

    $109.93

    View options

  • Weg CFW500-MMF Flash Memory Copy Module

    View options

    WEG Weg CFW500-MMF Flash Memory Copy Module

    The Weg CFW500-MMF memory copy module provides a simple means to copy VFD parameters from one drive to the next. It is battery powered and the drive should not be powered on during use. Documentation Weg-MMF Installation Guide

    Read more

    $114.16

    View options

  • Weg CFW500-CUSB USB Module

    View options

    WEG Weg CFW500-CUSB USB Module

    Delivery within 48 hours, pay afterwards

    The Weg CUSB module provides USB V2.0 communications with the VFD. Programming, parameter setting, and monitoring can be done using the supplied module and cable, connected to a computer running the free Weg WPS software. The module includes a USB cable with a mini-USB connector on the drive end, and a standard USB Type A connector on the computer end. It also supports Modbus RTu protocols. CFW500 CUSB I/O FUNCTION QTY Digital Inputs (isoloated) 4 Analog Inputs 1 Analog Outputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 Mini-USB Ports 1 +10VDC Ref 1 +24VDC 1 Documentation CFW500-CUSB Installation Guide CFW500 ModBus RTU Manual

    Read more

    Delivery within 48 hours, pay afterwards

    $126.84

    View options

  • Weg CFW500-ENC Encoder Module

    View options

    WEG Weg CFW500-ENC Encoder Module

    The Weg ENC encoder module provides 2 differential channels for encoder inputs up to 400 kHz. It also features configurable +5V or +12V output supply to support quadrature encoder operation. CFW500 ENC I/O FUNCTION QTY Digital Inputs (isoloated) 5 Analog Inputs 1 Analog Outputs 1 Relay Outputs (NO) 3 Digital Transistor Outputs 1 RS485 Ports 1 Quadrature A/*A Inputs 2 VE +5VDC/+12VDC 1 +24VDC 1 Documentation CFW500-ENC Installation Guide

    Read more

    $126.84

    View options

  • Weg CFW500 KN1 IP20/NEMA1 Protection Kit

    View options

    WEG Weg CFW500-KN1G Protection Kit

    The WEG KN1x NEMA 1/ IP20 protection kit provides a drip cover for the top of the VFD, as well as a conduit connection kit for the bottom incoming power connections, for frame sizes A through G. Documentation Weg-KN1F-G Installation Guide

    Read more

    $129.86

    View options

  • Weg HMI-01 Advanced Text Display / Keypad Unit

    View options

    WEG Weg HMI-01 Advanced Text Display / Keypad Unit

    Delivery within 48 hours, pay afterwards

     The Weg HMI-01 is a remote advanced text display and keypad for the newest line of WEG VFDs, including the CFW500-Gen2, and CFW11. It interfaces to any of the standard I/O  modules with RS-485.    Features Readable text descriptions of parameters and other settings Battery-backed storage of drive parameters and setup Real-Time battery-backed clock for tagging of events and faults WEG Product Code: 15578295 The RHMIF Remote mounting frame and CCHMIRxxxM cable is needed for remote mounting. For the standard display and keypad see the CFW500-RHMIF unit. See our CFW500 Remote Displays and Options page for all remote mounting options and comparisons. Documentation HMI-01 Installation Guide

    Read more

    Delivery within 48 hours, pay afterwards

    $150.85

    View options

  • Weg CFW500-CPDP ProfiBus Module

    View options

    WEG Weg CFW500-CPDP Profibus Module with DB9 Connector

    The Weg CPDP module supports Profibus protocols using a DB9 style connector CFW500-CPDP I/O FUNCTION QTY Digital Inputs (isoloated) 2 Analog Inputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 DB9 ProfiBus Port 1 +24VDC 1 Documentation CFW500 Profibus DP Manual CFW500-CPDP Profibus Module Install Guide Profibus DP Module GSDML V2.3 XML File Profibus DP EDD and GSD files

    Read more

    $244.62

    View options

  • Weg CFW500-CPDP2 ProfiBus Module

    View options

    WEG Weg CFW500-CPDP2 Profibus Module

    The Weg CPDP2 module provides Profibus protocols using bare wire screw terminal connections. CFW500-CPDP2 I/O FUNCTION QTY Digital Inputs (isoloated) 2 Analog Inputs 1 Relay Outputs (SPDT) 1 Digital Transistor Outputs 1 RS485 Ports 1 Profibus Terminals 1 +24VDC 1 Documentation CFW500 Profibus DP Manual CFW500-CPDP Profibus Module Install Guide Profibus DP Module GSDML V2.3 XML File Profibus DP EDD and GSD files

    Read more

    $268.78

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A01P6S2NB20 VFD 1.6 Amp 0.33 HP 230 VAC Single-Phase Input

    Delivery within 48 hours, pay afterwards

    WEG Product Code: 11575728 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    Delivery within 48 hours, pay afterwards

    $272.40

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A01P6S2NB20G2 VFD 1.6 Amp 0.33 HP 230 VAC Single-Phase Input

    WEG Product Code: 15571885 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. This is a CFW500 Generation 2 (G2) VFD. What is the difference? Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    $272.40

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A01P6B2NB20 VFD 1.6 Amp 0.33 HP 230 VAC Single/Three-Phase Input

    Delivery within 48 hours, pay afterwards

    WEG Product Code: 11575745 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    Delivery within 48 hours, pay afterwards

    $275.42

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A01P6B2NB20G2 VFD 1.6 Amp 0.33 HP 230 VAC Single/Three-Phase Input

    WEG Product Code: 15570800 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. This is a CFW500 Generation 2 (G2) VFD. What is the difference? Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    $275.42

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A02P6S2NB20G2 VFD 2.6 Amp 0.75 HP 230 VAC Single-Phase Input

    WEG Product Code: 15571949 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. This is a CFW500 Generation 2 (G2) VFD. What is the difference? Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    $279.65

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A02P6B2NB20G2 VFD 2.6 Amp 0.75 HP 230 VAC Single/Three-Phase Input

    WEG Product Code: 15571879 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. This is a CFW500 Generation 2 (G2) VFD. What is the difference? Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    $282.07

    View options

  • Weg CFW500 Ethernet Module

    View options

    WEG Weg CFW500-CEMB-TCP Modbus TCP Module

    The Weg CEMB-TCP module supports ModBus TCP protocols over an Ethernet RJ-45 connector. Documentation CFW500 Ethernet Module Manual

    Read more

    $301.40

    View options

  • Weg CFW500 Ethernet Module

    View options

    WEG Weg CFW500-CEPN-IO PROFINET IO Module

    Delivery within 48 hours, pay afterwards

    The Weg CEPN-IO module supports PROFINET protocols over an Ethernet RJ-45 connector. Documentation CFW500 Ethernet Module Manual CFW500 Profinet IO XML Configuration File

    Read more

    Delivery within 48 hours, pay afterwards

    $301.40

    View options

  • Weg CFW500 Ethernet Module

    View options

    WEG Weg CFW500-CETH-IP Ethernet Module

    The Weg CETH-IP module supports Ethernet IP protocols over an RJ-45 connector. Documentation CFW500 Ethernet Module Manual CFW500 Ethernet IP EDS Configuration File

    Read more

    $301.40

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A04P3S2NB20 VFD 4.3 Amp 1.5 HP 230 VAC Single-Phase Input

    Delivery within 48 hours, pay afterwards

    WEG Product Code: 11474973 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    Delivery within 48 hours, pay afterwards

    $301.40

    View options

  • CFW500 Frame Size A

    View options

    WEG Weg CFW500A04P3S2NB20G2 VFD 4.3 Amp 1.5 HP 230 VAC Single-Phase Input

    WEG Product Code: 15571953 The CFW500 series VFD is a compact cost-effective variable speed motor control for a variety of applications such as pumps, process control, extruders, general machinery and more. Available in IP20, IP66/NEMA4X and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable for frame sizes A through C. The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC. Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee. This is a CFW500 Generation 2 (G2) VFD. What is the difference? Features Multiple Control Modes: Scaler (V/F), VVW (including PM motor), Vector (open and closed loop) Heavy-Duty (HD) Rated: 150% Overload for 60 Seconds Built-In Motor Protection: Protects motor from overload/overcurrent, overvoltage, phase-loss, and more Built-in SoftPLC: Flexible customization with programmable ladder logic and free WPS software. Built-In PID Controller: PID mode provides closed loop process control from pressure, flow, or other input. Ambient Temp Rating to 50°C (frame-dependent) Large variety of communications and I/O Option Modules available: RS-232,RS-485, CANopen, DeviceNet, Profibus, Modbus, Ethernet IP and more Conformal-Coated Circuit Boards: Extends life of boards in corrosive environments, Class 3C2 / IEC 60721-3-3. Available with WEG Pump Genius: Simplex and Multiplex pump setups, prevent water hammer, dry-pump protection, and more Documentation CFW500 Users Manual CFW500 IP66 User Manual CFW500-G2 IP20 Brochure CFW500-G2 IP20 Product Flyer CFW500-G2 IP66 Product Flyer CFW500 Quick Setup Guide CFW500 Quick Parameters Reference CFW500 Programming Manual V3.7X CFW500 User/Programming Manual Addendum CFW500 SoftPLC Manual WEG Pump Genius Brochure

    Read more

    $301.40

    View options

You have seen 48 out of 102 products

Show more products

The Weg CFW500 VFD is designed with a large choice of plug-and-play options, including most communication buses. Available in both single-phase input up to 3 HP,  3-phase 240V up to 75 HP and 460V up to 175 HP.  NEMA 4X / IP66 versions are also available up to 25 HP. 

Features

  • Built-In programmable Soft-PLC for advanced control scenarios
  • IP20 Enclosure with optional NEMA 1 kit  (IP66 / NEMA 4X also available)
  • 200-240V, 380-480V, or 500-600 input voltages
  • 0 to 500 Hz output frequency
  • 2.5 to 15kHz adjustable carrier frequency
  • 4 isolated digital inputs built-in (more available as options)
  • 1 NC/NO  relay output up to 240VAC 0.5Amp
  • 1 Transistor output
  • 1 isolated analog input
  • 1 isolated analog output

 

© 2026 Caldwell Electric, Powered by Shopify

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa

Login

Forgot your password?

Don't have an account yet?
Create account