Techtop Motors Shipping Locations

We can arrange shipping or free pickup at any of the following Techtop locations, provided stock is available at the desired location.  Contact us if you need to arrange a free local pickup.

Techtop USA Warehouse Locations

 Georgia (Techtop USA Headquarters)
2815 Colonnades Court
 Norcross, GA 30071		 Caldwell Electric
Authorized Distributor
212 Otis Dr
Woodway, TX 76712
254-772-1899
Louisville, KY
260 Park Loop Rd
Shepherdsville, KY 40165		 Oklahoma City, OK
8417 SW 23rd PL
Oklahoma City, OK 73128
Dallas, TX
1523 Crescent Drive
Carrollton, TX 75006		 Houston, TX
5630 Guhn Road # 100
Houston, TX 77040
Odessa, TX
635 Industrial Ave
Odessa, TX 79761		 Phoenix, AZ
West Turney Ste A-1
Phoenix, AZ 85019
Fresno, CA
1816 S. Van Ness Ave
Fresno, CA 93721		 Portland, OR
7615 N. Upland Dr.
Portland, OR 97203
Reno, NV
Southern Way
Sparks, NV 89431		 Cleveland, OH
4540 Glennbrook Dr.
Willoughby, OH 44094
Itasca, IL 
921 Ardmore Ave.
Itasca, IL 60143		 Contact Us for inventory status at any of these locations.

 

Use the Filter Search below to narrow down your search:

788 products

Filter

Show previous products

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-56J-2-B-D-.33 TEFC 0.33 HP 3600 RPM 56J 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-56J-AL-TF.step

    Read more

    Normally ships within 24 hours

    $246.38

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-215JP-4-B-D-10 TEFC 10 HP 1800 RPM 215JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-215JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $1,090.03

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-215JP-2-B-D-10 TEFC 10 HP 3600 RPM 215JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-215JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $983.57

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-215JM-4-B-D-10 TEFC 10 HP 1800 RPM 215JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-215JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $1,090.03

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-215JM-2-B-D-15 TEFC 15 HP 3600 RPM 215JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-215JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $1,543.50

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-215JM-2-B-D-10 TEFC 10 HP 3600 RPM 215JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-215JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $919.82

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-213JP-4-B-D-7.5 TEFC 7.5 HP 1800 RPM 213JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-213JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $939.60

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-213JP-2-B-D-7.5 TEFC 7.5 HP 3600 RPM 213JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-213JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $880.97

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-213JM-4-B-D-7.5 TEFC 7.5 HP 1800 RPM 213JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-213JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $939.60

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-213JM-2-B-D-7.5 TEFC 7.5 HP 3600 RPM 213JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-213JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $880.97

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-184JP-4-B-D-5 TEFC 5 HP 1800 RPM 184JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-184JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $675.77

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-184JP-2-B-D-7.5 TEFC 7.5 HP 3600 RPM 184JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-184JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $873.65

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-184JP-2-B-D-5 TEFC 5 HP 3600 RPM 184JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-184JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $654.17

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-184JM-4-B-D-5 TEFC 5 HP 1800 RPM 184JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-184JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $675.77

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-184JM-2-B-D-5 TEFC 5 HP 3600 RPM 184JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-184JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $654.17

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-182JP-4-B-D-3 TEFC 3 HP 1800 RPM 182JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-182JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $599.40

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-182JP-2-B-D-3 TEFC 3 HP 3600 RPM 182JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-182JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $600.17

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-182JM-4-B-D-3 TEFC 3 HP 1800 RPM 182JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-182JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $599.40

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-182JM-2-B-D-3 TEFC 3 HP 3600 RPM 182JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-182JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $600.17

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JP-4-B-D-2 TEFC 2 HP 1800 RPM 145JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $415.03

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JP-4-B-D-1.5 TEFC 1.5 HP 1800 RPM 145JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $392.66

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JP-2-B-D-3 TEFC 3 HP 3600 RPM 145JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $568.51

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JP-2-B-D-2 TEFC 2 HP 3600 RPM 145JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $395.74

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JM-4-B-D-1.5 TEFC 1.5 HP 1800 RPM 145JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $392.66

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-145JM-2-B-D-2 TEFC 2 HP 3600 RPM 145JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-145JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $395.74

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-143JP-4-B-D-1 TEFC 1 HP 1800 RPM 143JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-143JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $334.03

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-143JP-2-B-D-1.5 TEFC 1.5 HP 3600 RPM 143JP 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-143JP-AL-TF.step

    Read more

    Normally ships within 24 hours

    $344.06

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-143JM-4-B-D-1 TEFC 1 HP 1800 RPM 143JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-143JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $334.03

    View options

  • Techtop J-Frame motor

    View options

    Techtop Techtop GR3-AL-TF-143JM-2-B-D-1.5 TEFC 1.5 HP 3600 RPM 143JM 208-230/460V Three-Phase Motor

    Normally ships within 24 hours

    Techtop JP / JM motor are perfect for pump applications, with standard frame sizes to match close-coupled pumps. Available in light-weight aluminum frames up to 15 HP, and cast iron from 15 HP and up. Techtop motors are well built with many features not found on other motors. They are NEMA Premium rated for efficiency, and inverter-duty rated for use with variable frequency drives (VFDs). Can be field-configurable for the terminal box on the left (F1 - standard, looking at shaft-end), or F2 (right) or F3 (top). A service factor of 1.15 along with IP 55 rating and 300 series stainless steel shaft makes these motors an excellent value. Comes with a 3-year / 36-month warranty. Spec Sheets 200/400V-60Hz230/460V-60Hz190/380V-50Hz 3D Models GR-143JM-AL-TF.step

    Read more

    Normally ships within 24 hours

    $344.06

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-449T-6-RR-E-200 TEFC 200 HP 1200 449T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-449T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $17,753.25

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-449T-4-RR-E-300 TEFC 300 HP 1800 449T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-449T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $19,801.50

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-449T-4-RR-E-250 TEFC 250 HP 1800 449T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-449T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $17,313.75

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-447T-6-RR-E-150 TEFC 150 HP 1200 447T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-447T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $14,201.25

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-447T-4-RR-E-200 TEFC 200 HP 1800 447T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-447T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $15,258.00

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-445T-6-RR-E-125 TEFC 125 HP 1200 445T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-445T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $11,235.00

    View options

  • Techtop Crusher Duty Motor

    View options

    Techtop Techtop OX3-CI-TF-445T-4-RR-E-150 TEFC 150 HP 1800 445T Three-Phase Crusher Duty Motor

    Normally ships within 24 hours

    Techtop Crusher motors are specifically built for harsh rock crushing environments. Design features include oversized drive end roller bearings for belt side-loading of shaft, 4140 Carbon Steel Shaft, and NEMA Design C for high starting torque. Spec Sheets 460V-60Hz 3D Models OX-445T-CI-TF.step Crusher Motor Line Card

    Read more

    Normally ships within 24 hours

    $12,204.75

    View options

You have seen 396 out of 788 products

Show more products

© 2026 Caldwell Electric, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account