Contactors provide a low-cost easy way to start heavy loads such as electric motors, large lighting systems, and machinery. Contactors easily mount on a snap on/off DIN rail, or can be mounted by screws. Adding an Overload Relay will provide load protection from over-current conditions, as well as phase loss and other events which might harm a motor.
Contactors
-
WEG WEG CWB32-11-30C09 32 Amp 3 Pole Contactor 60VDC Coil
The CWB series is the newest line of contactors from WEG, offering compact solutions for circuit switching and motor control. These magnetic contactors are available up to 125 Amps in IEC versions and up to 95 Amps In NEMA Sizes sizes 00 to 3. Both the IEC and NEMA rated contactors are DIN-rail mountable, or can be mounted with screws. All terminals are accessible from the front, including coil connections, simplifying installation and trouble-shooting.NOTE: DC Coils from WEG have been difficult to obtain. Please contact us for availability Specs Rated Current: 32 Amps NEMA Size: N/A Power Poles: 3 Pole Coil Voltage: 60VDC Aux Contacts: 1 NC 1 NO Approvals: CE and UL - UL File No. E202315 Features Zero-Width Mechanical Interlock Built-In Aux. Contacts 1NO, 1NC Extra auxiliary contacts can be added to front and side All terminals accessible from top, including coil Front plug-in slot for coil suppressor modules DIN-Rail or Screw Mountable Front channel wire guide for clean, organized installation IEC 60947, UL 508, CE Conformance Documentation Weg CWB Flyer Weg CWB & RW27 Catalog CWB Accessories Auxiliary Contact Blocks Replacement Coils Coil Surge Suppressors Mechanical Interlocks Bus bars for reversing and star-delta configurations CWB Overloads An overload relay is strongly recommended when a contactor is used for starting an electric motor. These devices protect expensive motors from overload or phase loss which may occur due to a blown fuse, and current imbalances which may result from loose connections or unbalanced incoming voltage.
$74.12
-
WEG WEG CWM105-00-20V04 105 Amp 2 Pole Contactor with 24 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-20V04 Rated Current: 105 Amp Coil Voltage: 24 VAC 60Hz / 20 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM9-105 Installation Instructions 3-D Models and More WEG Downloads
$162.11
-
WEG WEG CWM105-00-20V18 105 Amp 2 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-20V18 Rated Current: 105 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$162.11
-
WEG WEG CWM105-00-20V24 105 Amp 2 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-20V24 Rated Current: 105 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$162.11
-
WEG WEG CWM105-00-30C34 105 Amp 3 Pole Contactor with 24-28 VDC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30C34 Rated Current: 105 Amp Coil Voltage: 24-28 VDC Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$272.70
-
WEG WEG CWM105-00-30V04 105 Amp 3 Pole Contactor with 24 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V04 Rated Current: 105 Amp Coil Voltage: 24 VAC 60Hz / 20 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V10 105 Amp 3 Pole Contactor with 48VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V10 Rated Current: 105 Amp Coil Voltage: 48VAC 60Hz / 24 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V18 105 Amp 3 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V18 Rated Current: 105 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V24 105 Amp 3 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V24 Rated Current: 105 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V37 105 Amp 3 Pole Contactor with 277 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V37 Rated Current: 105 Amp Coil Voltage: 277 VAC 60Hz / 230-240 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V47 105 Amp 3 Pole Contactor with 480 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V47 Rated Current: 105 Amp Coil Voltage: 480 VAC 60Hz / 400-415 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-00-30V56 105 Amp 3 Pole Contactor with 600 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-00-30V56 Rated Current: 105 Amp Coil Voltage: 600 VAC 60Hz / 500 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$198.47
-
WEG WEG CWM105-11-30V18 105 Amp 3 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-11-30V18 Rated Current: 105 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$208.57
-
WEG WEG CWM105-11-30V24 105 Amp 3 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-11-30V24 Rated Current: 105 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$208.57
-
WEG WEG CWM105-11-30V47 105 Amp 3 Pole Contactor with 480 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM105-11-30V47 Rated Current: 105 Amp Coil Voltage: 480 VAC 60Hz / 400-415 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$208.57
-
WEG WEG CWM112-22-30E02 112 Amp 3 Pole Contactor with 24-28V AC/DC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM112-22-30E02 Rated Current: 112 Amp Coil Voltage: 24-28V AC/DC Number of Power Poles: 3 Pole Auxiliary Contacts: 2 NO 2 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$436.83
-
WEG WEG CWM112-22-30E10 112 Amp 3 Pole Contactor with 110-130V AC/DC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM112-22-30E10 Rated Current: 112 Amp Coil Voltage: 110-130V AC/DC Number of Power Poles: 3 Pole Auxiliary Contacts: 2 NO 2 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$436.83
-
WEG WEG CWM112-22-30E13 112 Amp 3 Pole Contactor with 208-250V AC/DC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM112-22-30E13 Rated Current: 112 Amp Coil Voltage: 208-250V AC/DC Number of Power Poles: 3 Pole Auxiliary Contacts: 2 NO 2 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$436.83
-
WEG WEG CWM112-22-30E21 112 Amp 3 Pole Contactor with 430-500V AC/DC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM112-22-30E21 Rated Current: 112 Amp Coil Voltage: 430-500V AC/DC Number of Power Poles: 3 Pole Auxiliary Contacts: 2 NO 2 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$436.83
-
WEG WEG CWM12-00-20V04 12 Amp 2 Pole Contactor with 24 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-00-20V04 Rated Current: 12 Amp Coil Voltage: 24 VAC 60Hz / 20 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM9-105 Installation Instructions 3-D Models and More WEG Downloads
$34.34
-
WEG WEG CWM12-00-20V18 12 Amp 2 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-00-20V18 Rated Current: 12 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$34.34
-
WEG WEG CWM12-00-20V24 12 Amp 2 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-00-20V24 Rated Current: 12 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 2 Pole Auxiliary Contacts: 0 (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$29.75
-
WEG WEG CWM12-01-30V04 12 Amp 3 Pole Contactor with 24 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V04 Rated Current: 12 Amp Coil Voltage: 24 VAC 60Hz / 20 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V10 12 Amp 3 Pole Contactor with 48VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V10 Rated Current: 12 Amp Coil Voltage: 48VAC 60Hz / 24 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V18 12 Amp 3 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V18 Rated Current: 12 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V24 12 Amp 3 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V24 Rated Current: 12 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V37 12 Amp 3 Pole Contactor with 277 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V37 Rated Current: 12 Amp Coil Voltage: 277 VAC 60Hz / 230-240 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V47 12 Amp 3 Pole Contactor with 480 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V47 Rated Current: 12 Amp Coil Voltage: 480 VAC 60Hz / 400-415 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-01-30V56 12 Amp 3 Pole Contactor with 600 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-01-30V56 Rated Current: 12 Amp Coil Voltage: 600 VAC 60Hz / 500 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NC (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V04 12 Amp 3 Pole Contactor with 24 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V04 Rated Current: 12 Amp Coil Voltage: 24 VAC 60Hz / 20 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V10 12 Amp 3 Pole Contactor with 48VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V10 Rated Current: 12 Amp Coil Voltage: 48VAC 60Hz / 24 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V18 12 Amp 3 Pole Contactor with 120 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V18 Rated Current: 12 Amp Coil Voltage: 120 VAC 60Hz / 110 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V24 12 Amp 3 Pole Contactor with 208-240 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V24 Rated Current: 12 Amp Coil Voltage: 208-240 VAC 60Hz / 180-208 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V37 12 Amp 3 Pole Contactor with 277 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V37 Rated Current: 12 Amp Coil Voltage: 277 VAC 60Hz / 230-240 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V47 12 Amp 3 Pole Contactor with 480 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V47 Rated Current: 12 Amp Coil Voltage: 480 VAC 60Hz / 400-415 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
-
WEG WEG CWM12-10-30V56 12 Amp 3 Pole Contactor with 600 VAC Coil
The WEG CWM contactors are designed for industrial duty reliability. Rated for inductive loads up to 800 Amp, conforming to UL 508, IEC 60947 and CE. A variety of options are available including replacement coils, auxiliary contacts and overloads. Specs Model No: CWM12-10-30V56 Rated Current: 12 Amp Coil Voltage: 600 VAC 60Hz / 500 VAC 50Hz Number of Power Poles: 3 Pole Auxiliary Contacts: 1 NO (More available as added option) Features 2-pole and 3-pole contactors Panel Mountable on 35mm DIN rails up to CWM105 size Wide range of AC and DC Coils Compact Footprint Easy-to-use accessories through snap-on connectivity Conforms to UL 508, IEC 60947, CE Documentation WEG CWM Flyer WEG CWM Catalog WEG CWM Contactor Installation Instructions CWM9 to CWM105 WEG CWM Contactor Installation Instructions CWM400 to CWM800 3-D Models and More WEG Downloads
$44.95
You have seen 36 out of 241 products