CFW500 Frame Size F

Weg CFW500F88P0T2DB20G2 VFD 88.0 Amp 25-30 HP 230 VAC 3-phase

  • $3,250.00


The CFW500 series AC Drive for electric motors is a compact, cost-effective VFD for a variety of applications such as pumps, process control, extruders, general machinery and more. A wide variety of options include SoftPLC programming, USB, RS-232 & RS-485, CANopen, Profibus, Modbus, Ethernet IP and more. Available in IP20 and NEMA 1 Enclosures (NEMA 1 special order). The IP20 is DIN rail mountable.

The CFW500 series has built-in softPLC support for custom programming. This can often eliminate the need for an external PLC.

Caldwell Electric can setup VFD parameters and develop custom PLC programs to fit your needs for a nominal fee.

GEN2: This is a CFW500 generation 2 VFD, as noted by the 'G2' at the end of the catalog number

Catalog No. CFW500F88P0T2DB20G2
Phase 3-phase
Voltage 200-240 VAC
Amps 88.0
HP 25-30*
Braking Transistor Dynamic Braking Transistor
Enclosure IP20
Frame Size {'H': 21.6, 'W': 11.8, 'D': 10}
Weight 57.3 LB

A Note on HP: It is best to match a VFD drive to the motor based on nameplate current, rather than HP. This is because the drive power electronics are rated by current. To ensure the drive can handle the motor nameplate current, the drive's current should be at least as high as the full load amps of the motor, and better if allowing is made for the service factor as well. So for example, a motor with nampelate current of 10 amps, with a S.F. rating of 1.15 could draw up to 11.5 Amps. Choose a VFD with a current rating of 11.5 or more.

Documentation

,