Weg CFW300-IOADR-D I/O Module: NTC (Infrared) Input, Infrared Remote with Display, 3 DOR
The Weg CFW300-IOADR-D module provides a wireless infrared remote control and display for the CFW300 VFD. The kit includes the IOADR-D module, the infrared remote control with display, and a 2-meter cable between the module and IR sensor. Maximum distancebetween the sensor and the remote is 8 meters.
The Infrared Remote and display contains a total of 10 keys. The function of the keys are listed below:
|*||Send a command to enable/disable the COOL and UVC funtions|
|Func||Send command to enable/disable special function.|
|Mode||Send command to change operating mode between AUTO and MAN|
|Swing||Send command to enable/disable the SWING function|
|Timer||Send command to enable timers 01 - 02 -03|
|Clean||Send command to enable/disable the CLEAN function|
|(cycle)||Send command to enable/disable the DRY function|
|Up||Increments and sends percentage/temperature values|
|Down||Decrements and sends percentage/temperature values|
|Power||Sends ON/OFF commands. Press and Hold 5 seconds toggles temp. units from °F to °C.|
The IOADR module also contains 3 NO (Normally Open) Relay contacts good for up to 5 Amps.