{"title":"Weg Thermal Overload Relays","description":"\u003cp\u003eWeg thermal overload relays are an inexpensive solution to protecting expensive electric motors from burn-up due to overload conditions, phase-loss or current unbalances.  \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProtected Conditions:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverload \u003c\/strong\u003e can occur when the motor is asked to do more work than it was designed for, or from mechanical failures in the machinery.  Attempting to run too much material too quickly through a machine is one common cause of failure.  Pump motors can also be overloaded by attempting to pump more water over a given amount of time than the motor was designed for.  Other mechanical faults can also cause overloading, including motor and machinery bearing failures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhase-Loss \u003c\/strong\u003eis a common cause of motor winding failures and occurs when one of the fuses in a three-phase circuit blows. Weg thermal overload relays detect phase-loss and shut down the motor by opening up the contactor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent Imbalance\u003c\/strong\u003e can occur when one there is a voltage drop or surge in one of the phases in incoming power.  The higher or lower voltage causes more or less current on one of the power leads to the motor, which can eventually burn up the windings. The Weg thermal overload relays sense current imbalance and shut down the motor.\u003c\/p\u003e\n\u003ch3\u003eStandard Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClass 10 Trip characteristics (read more below about Class trip ratings)\u003c\/li\u003e\n\u003cli\u003eSelectable Auto\/Man reset button (read more below)\u003c\/li\u003e\n\u003cli\u003eSettable current overload range\u003c\/li\u003e\n\u003cli\u003ePhase-loss and current imbalance protection\u003c\/li\u003e\n\u003cli\u003eIsolated 1 NO \u0026amp; 1NC contact\u003c\/li\u003e\n\u003cli\u003e2 and 3-pole versions available (single and three-phase)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is Trip Class?\u003c\/h3\u003e\n\u003cp\u003eClass 10, 20, and 30 ratings on overloads refer to how quickly the overload will respond to an overload event.  Similar to a fuse, the larger the overload, the more quickly the relay will trip.  The graphic below shows the response times vs overload for the 3 classes:\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" alt=\"thermal overload class trip graph\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-trip-class-graph_600x600.png?v=1648525730\" width=\"658\" height=\"353\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-trip-class-graph_600x600.png?v=1648525730\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultifunction Reset \/ Test Button\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe button has four positions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA  - Auto Reset Only: The test feature is disabled, and the relay will attempt to reset itself after the recovery time period.\u003c\/li\u003e\n\u003cli\u003eAuto = Auto Reset \/ Test: The test featuer is enabled, and the relay will attempt to reset itself after the recovery time period.\u003c\/li\u003e\n\u003cli\u003eHand - Manual Reset \/ Test: The test feature is enabled and the relay will only reset after the button has been pressed and the recovery time period has elapsed.\u003c\/li\u003e\n\u003cli\u003eH - Manual Reset Only: The test feature is disabled and the relay will only reset after the button has been pressed and the recovery time period has elapsed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"weg-rw407-2d3-u840-thermal-overload","title":"WEG RW407-2D3-U840 3 Pole Overload Relay 560-840 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM800 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 560-840 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Weg","offers":[{"title":"Default Title","offer_id":39734802284657,"sku":"Weg-RW407-2D3-U840","price":454.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/products\/Weg_RW407_0e7016a7-65c4-4b46-83c3-7e2899e4dc69.jpg?v=1648531863"},{"product_id":"weg-rw117-1d3-u080-3-pole-overload-relay-63-0-80-0-amp","title":"WEG RW117-1D3-U080 3 Pole Overload Relay 63.0-80.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM95, CWM105, CWM95N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 63.0-80.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117D: Remote Mounting Kit for RW117-1D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218037084273,"sku":"Weg-RW117-1D3-U080","price":98.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_3dcec82e-217d-407c-b654-3d6df42a456f.jpg?v=1753532916"},{"product_id":"weg-rw117-1d3-u097-3-pole-overload-relay-75-0-97-0-amp","title":"WEG RW117-1D3-U097 3 Pole Overload Relay 75.0-97.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM95, CWM105, CWM95N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 75.0-97.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117D: Remote Mounting Kit for RW117-1D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218037411953,"sku":"Weg-RW117-1D3-U097","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_56a03a75-8c7f-4a51-9790-47566bebe30c.jpg?v=1753532922"},{"product_id":"weg-rw117-1d3-u112-3-pole-overload-relay-90-0-112-amp","title":"WEG RW117-1D3-U112 3 Pole Overload Relay 90.0-112 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM95, CWM105, CWM95N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 90.0-112 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117D: Remote Mounting Kit for RW117-1D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218037510257,"sku":"Weg-RW117-1D3-U112","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_457f60aa-51bd-4459-a331-0b18e7c2dae5.jpg?v=1753532929"},{"product_id":"weg-rw117-2d3-u097-3-pole-overload-relay-75-0-97-0-amp","title":"WEG RW117-2D3-U097 3 Pole Overload Relay 75.0-97.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM112, CWM150, CWM150N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 75.0-97.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGA117D: Overload Connector Links for CWM112\/150 contactors\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218037575793,"sku":"Weg-RW117-2D3-U097","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_e0310611-f85c-48e2-8838-a23561b96fda.jpg?v=1753532934"},{"product_id":"weg-rw117-2d3-u112-3-pole-overload-relay-90-0-112-amp","title":"WEG RW117-2D3-U112 3 Pole Overload Relay 90.0-112 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM112, CWM150, CWM150N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 90.0-112 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGA117D: Overload Connector Links for CWM112\/150 contactors\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218037739633,"sku":"Weg-RW117-2D3-U112","price":152.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_1e2f6937-926e-4181-9cde-7e3472641ead.jpg?v=1753532941"},{"product_id":"weg-rw117-3d3-u080-3-pole-overload-relay-63-0-80-0-amp","title":"WEG RW117-3D3-U080 3 Pole Overload Relay 63.0-80.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB95, CWB110, CWB125, CWBN3 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 63.0-80.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117-3D: Remote Mounting Kit for RWM117-3D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218045472881,"sku":"Weg-RW117-3D3-U080","price":128.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_eb0a1beb-dd53-4f4c-bf57-18d57dad4d23.jpg?v=1753533452"},{"product_id":"weg-rw117-3d3-u097-3-pole-overload-relay-75-0-97-0-amp","title":"WEG RW117-3D3-U097 3 Pole Overload Relay 75.0-97.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB95, CWB110, CWB125, CWBN3 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 75.0-97.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117-3D: Remote Mounting Kit for RWM117-3D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218045571185,"sku":"Weg-RW117-3D3-U097","price":145.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_a66c6f1b-8d2b-4ad9-b631-0d7a75ebee09.jpg?v=1753533457"},{"product_id":"weg-rw117-3d3-u112-3-pole-overload-relay-90-0-112-amp","title":"WEG RW117-3D3-U112 3 Pole Overload Relay 90.0-112 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB95, CWB110, CWB125, CWBN3 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 90.0-112 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117-3D: Remote Mounting Kit for RWM117-3D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218045603953,"sku":"Weg-RW117-3D3-U112","price":152.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_4de950fd-8389-4d1e-8658-555a15104c99.jpg?v=1753533459"},{"product_id":"weg-rw117-3d3-u140-3-pole-overload-relay-110-140-amp","title":"WEG RW117-3D3-U140 3 Pole Overload Relay 110-140 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB95, CWB110, CWB125, CWBN3 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 110-140 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF117-3D: Remote Mounting Kit for RWM117-3D Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049437809,"sku":"Weg-RW117-3D3-U140","price":173.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW117D-640x640_ac4b8a76-0daf-4c95-89c5-56c0f10560b5.jpg?v=1753533916"},{"product_id":"weg-rw27-1d2-c063-2-pole-overload-relay-0-40-0-63-amp","title":"WEG RW27-1D2-C063 2 Pole Overload Relay 0.40-0.63 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.40-0.63 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049503345,"sku":"Weg-RW27-1D2-C063","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_faa81d9b-e4be-4e57-a8ef-a51f29e8e002.jpg?v=1753533922"},{"product_id":"weg-rw27-1d2-d004-2-pole-overload-relay-0-28-0-40-amp","title":"WEG RW27-1D2-D004 2 Pole Overload Relay 0.28-0.40 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.28-0.40 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049601649,"sku":"Weg-RW27-1D2-D004","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_d8510089-b861-420f-ae6d-f89d8092d79c.jpg?v=1753533927"},{"product_id":"weg-rw27-1d2-d008-2-pole-overload-relay-0-56-0-80-amp","title":"WEG RW27-1D2-D008 2 Pole Overload Relay 0.56-0.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.56-0.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049667185,"sku":"Weg-RW27-1D2-D008","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_d63620b7-265d-4018-9674-c4b6dacd7d67.jpg?v=1753533933"},{"product_id":"weg-rw27-1d2-d012-2-pole-overload-relay-0-80-1-20-amp","title":"WEG RW27-1D2-D012 2 Pole Overload Relay 0.80-1.20 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.80-1.20 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049765489,"sku":"Weg-RW27-1D2-D012","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_88fa5888-e0b6-4f27-91df-ed01ebf2e844.jpg?v=1753533939"},{"product_id":"weg-rw27-1d2-d018-2-pole-overload-relay-1-20-1-80-amp","title":"WEG RW27-1D2-D018 2 Pole Overload Relay 1.20-1.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.20-1.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049831025,"sku":"Weg-RW27-1D2-D018","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_b1bf7a99-8144-4aeb-9bcf-99e997681237.jpg?v=1753533945"},{"product_id":"weg-rw27-1d2-d028-2-pole-overload-relay-1-80-2-80-amp","title":"WEG RW27-1D2-D028 2 Pole Overload Relay 1.80-2.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.80-2.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049929329,"sku":"Weg-RW27-1D2-D028","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_01176a88-6952-4cae-b93f-88fa8a3c8b67.jpg?v=1753533950"},{"product_id":"weg-rw27-1d2-d063-2-pole-overload-relay-4-00-6-30-amp","title":"WEG RW27-1D2-D063 2 Pole Overload Relay 4.00-6.30 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 4.00-6.30 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218049994865,"sku":"Weg-RW27-1D2-D063","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_cd095b9d-1d41-4c5f-9d87-44df4719a36c.jpg?v=1753533956"},{"product_id":"weg-rw27-1d2-d125-2-pole-overload-relay-8-00-12-5-amp","title":"WEG RW27-1D2-D125 2 Pole Overload Relay 8.00-12.5 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 8.00-12.5 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050093169,"sku":"Weg-RW27-1D2-D125","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_5f48a27c-311d-410e-bf8e-85bcec498302.jpg?v=1753533962"},{"product_id":"weg-rw27-1d2-u004-2-pole-overload-relay-2-50-4-00-amp","title":"WEG RW27-1D2-U004 2 Pole Overload Relay 2.50-4.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 2.50-4.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050158705,"sku":"Weg-RW27-1D2-U004","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_7aa45e91-fd01-477b-9cac-f639fc42b93b.jpg?v=1753533967"},{"product_id":"weg-rw27-1d2-u008-2-pole-overload-relay-5-60-8-00-amp","title":"WEG RW27-1D2-U008 2 Pole Overload Relay 5.60-8.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 5.60-8.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050224241,"sku":"Weg-RW27-1D2-U008","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_30c7d47a-3e3a-4fad-82d0-3e4c2bb95812.jpg?v=1753533973"},{"product_id":"weg-rw27-1d2-u010-2-pole-overload-relay-7-00-10-0-amp","title":"WEG RW27-1D2-U010 2 Pole Overload Relay 7.00-10.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 7.00-10.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050289777,"sku":"Weg-RW27-1D2-U010","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_243de545-bd9c-4804-88e5-a85acfe3b018.jpg?v=1753533979"},{"product_id":"weg-rw27-1d2-u015-2-pole-overload-relay-10-0-15-0-amp","title":"WEG RW27-1D2-U015 2 Pole Overload Relay 10.0-15.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 10.0-15.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050322545,"sku":"Weg-RW27-1D2-U015","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_8debe128-e463-419a-b162-3f765b4fad27.jpg?v=1753533983"},{"product_id":"weg-rw27-1d2-u017-2-pole-overload-relay-11-0-17-0-amp","title":"WEG RW27-1D2-U017 2 Pole Overload Relay 11.0-17.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 11.0-17.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050355313,"sku":"Weg-RW27-1D2-U017","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_312f066b-b110-4b70-9992-3aece6f0c4c5.jpg?v=1753533988"},{"product_id":"weg-rw27-1d2-u023-2-pole-overload-relay-15-0-23-0-amp","title":"WEG RW27-1D2-U023 2 Pole Overload Relay 15.0-23.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 15.0-23.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050453617,"sku":"Weg-RW27-1D2-U023","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_7a788390-0f1d-4ce6-ad6c-7f89edf56559.jpg?v=1753533994"},{"product_id":"weg-rw27-1d2-u032-2-pole-overload-relay-22-0-32-0-amp","title":"WEG RW27-1D2-U032 2 Pole Overload Relay 22.0-32.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 22.0-32.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050519153,"sku":"Weg-RW27-1D2-U032","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_882a1626-d53c-4104-ade1-4e88078a9cdb.jpg?v=1753533998"},{"product_id":"weg-rw27-1d3-c063-3-pole-overload-relay-0-40-0-63-amp","title":"WEG RW27-1D3-C063 3 Pole Overload Relay 0.40-0.63 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.40-0.63 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050617457,"sku":"Weg-RW27-1D3-C063","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_018a7e57-64ed-481d-a415-adaf0c8a5fd6.jpg?v=1753534004"},{"product_id":"weg-rw27-1d3-d004-3-pole-overload-relay-0-28-0-40-amp","title":"WEG RW27-1D3-D004 3 Pole Overload Relay 0.28-0.40 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.28-0.40 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050814065,"sku":"Weg-RW27-1D3-D004","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_8cf9e572-edd1-4ce3-b712-60cb9b363afc.jpg?v=1753534009"},{"product_id":"weg-rw27-1d3-d008-3-pole-overload-relay-0-56-0-80-amp","title":"WEG RW27-1D3-D008 3 Pole Overload Relay 0.56-0.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.56-0.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050879601,"sku":"Weg-RW27-1D3-D008","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_68a889a9-cf21-419f-93a4-f98f92c1e0ae.jpg?v=1753534016"},{"product_id":"weg-rw27-1d3-d012-3-pole-overload-relay-0-80-1-20-amp","title":"WEG RW27-1D3-D012 3 Pole Overload Relay 0.80-1.20 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.80-1.20 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050912369,"sku":"Weg-RW27-1D3-D012","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_5ac4775a-59da-48ee-af45-2195f0cd70ac.jpg?v=1753534021"},{"product_id":"weg-rw27-1d3-d018-3-pole-overload-relay-1-20-1-80-amp","title":"WEG RW27-1D3-D018 3 Pole Overload Relay 1.20-1.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.20-1.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050945137,"sku":"Weg-RW27-1D3-D018","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_d17e7fc8-155e-4aed-87d6-f975d7ebb739.jpg?v=1753534027"},{"product_id":"weg-rw27-1d3-d028-3-pole-overload-relay-1-80-2-80-amp","title":"WEG RW27-1D3-D028 3 Pole Overload Relay 1.80-2.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.80-2.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218050977905,"sku":"Weg-RW27-1D3-D028","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_e00d1343-fdf3-4752-8cbc-e1216e68875a.jpg?v=1753534033"},{"product_id":"weg-rw27-1d3-d063-3-pole-overload-relay-4-00-6-30-amp","title":"WEG RW27-1D3-D063 3 Pole Overload Relay 4.00-6.30 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 4.00-6.30 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051043441,"sku":"Weg-RW27-1D3-D063","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_8366056b-8cb0-4631-b4ed-730350e44679.jpg?v=1753534038"},{"product_id":"weg-rw27-1d3-d125-3-pole-overload-relay-8-00-12-5-amp","title":"WEG RW27-1D3-D125 3 Pole Overload Relay 8.00-12.5 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 8.00-12.5 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051141745,"sku":"Weg-RW27-1D3-D125","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_19f3271c-17c0-4982-8898-df1508af4486.jpg?v=1753534043"},{"product_id":"weg-rw27-1d3-u004-3-pole-overload-relay-2-50-4-00-amp","title":"WEG RW27-1D3-U004 3 Pole Overload Relay 2.50-4.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 2.50-4.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051207281,"sku":"Weg-RW27-1D3-U004","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_58a178b4-bf93-4d5b-bc63-1a6f4da792f3.jpg?v=1753534049"},{"product_id":"weg-rw27-1d3-u008-3-pole-overload-relay-5-60-8-00-amp","title":"WEG RW27-1D3-U008 3 Pole Overload Relay 5.60-8.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 5.60-8.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051272817,"sku":"Weg-RW27-1D3-U008","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_0cbf648a-0c18-490d-ac5b-8efa95ebfb74.jpg?v=1753534053"},{"product_id":"weg-rw27-1d3-u010-3-pole-overload-relay-7-00-10-0-amp","title":"WEG RW27-1D3-U010 3 Pole Overload Relay 7.00-10.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 7.00-10.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051338353,"sku":"Weg-RW27-1D3-U010","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_4af91c37-938d-4585-a757-8abe2435deb8.jpg?v=1753534059"},{"product_id":"weg-rw27-1d3-u015-3-pole-overload-relay-10-0-15-0-amp","title":"WEG RW27-1D3-U015 3 Pole Overload Relay 10.0-15.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 10.0-15.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051403889,"sku":"Weg-RW27-1D3-U015","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_005a8489-9bf7-48cc-87dc-ff4b2978b750.jpg?v=1753534063"},{"product_id":"weg-rw27-1d3-u017-3-pole-overload-relay-11-0-17-0-amp","title":"WEG RW27-1D3-U017 3 Pole Overload Relay 11.0-17.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 11.0-17.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051469425,"sku":"Weg-RW27-1D3-U017","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_53149cdf-390f-4969-b46f-e3a2fcc4c048.jpg?v=1753534069"},{"product_id":"weg-rw27-1d3-u023-3-pole-overload-relay-15-0-23-0-amp","title":"WEG RW27-1D3-U023 3 Pole Overload Relay 15.0-23.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 15.0-23.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051567729,"sku":"Weg-RW27-1D3-U023","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_2955651c-37ec-40d1-aba9-a909b6705021.jpg?v=1753534074"},{"product_id":"weg-rw27-1d3-u032-3-pole-overload-relay-22-0-32-0-amp","title":"WEG RW27-1D3-U032 3 Pole Overload Relay 22.0-32.0 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWM9, CWM12, CWM18, CWM25, CWM9N, CWM18N contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 22.0-32.0 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 3\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27D: Remote Mounting Kit for RW27-1D and RWM40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051600497,"sku":"Weg-RW27-1D3-U032","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-1D-1200Wx1200H_e516094c-730f-4ef8-bf49-81bd98faa6bc.jpg?v=1753534079"},{"product_id":"weg-rw27-2d2-c063-2-pole-overload-relay-0-40-0-63-amp","title":"WEG RW27-2D2-C063 2 Pole Overload Relay 0.40-0.63 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.40-0.63 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051633265,"sku":"Weg-RW27-2D2-C063","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_307b16ec-b7b8-4310-974c-69fca93f6a13.jpg?v=1753534084"},{"product_id":"weg-rw27-2d2-d004-2-pole-overload-relay-0-28-0-40-amp","title":"WEG RW27-2D2-D004 2 Pole Overload Relay 0.28-0.40 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.28-0.40 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051666033,"sku":"Weg-RW27-2D2-D004","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_7440017d-affb-47db-bbd8-e957aa2a5ba8.jpg?v=1753534090"},{"product_id":"weg-rw27-2d2-d008-2-pole-overload-relay-0-56-0-80-amp","title":"WEG RW27-2D2-D008 2 Pole Overload Relay 0.56-0.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.56-0.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051731569,"sku":"Weg-RW27-2D2-D008","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_486b9b47-8e1a-4da5-bc56-f1f59c629f61.jpg?v=1753534096"},{"product_id":"weg-rw27-2d2-d012-2-pole-overload-relay-0-80-1-20-amp","title":"WEG RW27-2D2-D012 2 Pole Overload Relay 0.80-1.20 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 0.80-1.20 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051829873,"sku":"Weg-RW27-2D2-D012","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_cfe87535-b600-45be-bed6-30e2efc1cdbc.jpg?v=1753534102"},{"product_id":"weg-rw27-2d2-d018-2-pole-overload-relay-1-20-1-80-amp","title":"WEG RW27-2D2-D018 2 Pole Overload Relay 1.20-1.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.20-1.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051895409,"sku":"Weg-RW27-2D2-D018","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_7c6d6839-dc0d-4dab-a11b-4cd92bef4f48.jpg?v=1753534107"},{"product_id":"weg-rw27-2d2-d028-2-pole-overload-relay-1-80-2-80-amp","title":"WEG RW27-2D2-D028 2 Pole Overload Relay 1.80-2.80 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 1.80-2.80 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218051960945,"sku":"Weg-RW27-2D2-D028","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_4ebe73b8-df24-411c-b4d3-1eef462539e0.jpg?v=1753534113"},{"product_id":"weg-rw27-2d2-d063-2-pole-overload-relay-4-00-6-30-amp","title":"WEG RW27-2D2-D063 2 Pole Overload Relay 4.00-6.30 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 4.00-6.30 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218052026481,"sku":"Weg-RW27-2D2-D063","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_346f34ab-25c6-42c2-8de5-674a3dc85cd3.jpg?v=1753534118"},{"product_id":"weg-rw27-2d2-d125-2-pole-overload-relay-8-00-12-5-amp","title":"WEG RW27-2D2-D125 2 Pole Overload Relay 8.00-12.5 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 8.00-12.5 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218052124785,"sku":"Weg-RW27-2D2-D125","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_5372bc47-df54-43a9-9357-538c9646f923.jpg?v=1753534124"},{"product_id":"weg-rw27-2d2-u004-2-pole-overload-relay-2-50-4-00-amp","title":"WEG RW27-2D2-U004 2 Pole Overload Relay 2.50-4.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 2.50-4.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218052255857,"sku":"Weg-RW27-2D2-U004","price":26.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_db22f7eb-18d5-4378-861a-8adff236e016.jpg?v=1753534130"},{"product_id":"weg-rw27-2d2-u008-2-pole-overload-relay-5-60-8-00-amp","title":"WEG RW27-2D2-U008 2 Pole Overload Relay 5.60-8.00 Amp","description":"\n\u003cp\u003eWeg RW series of thermal overload relays are Class 10 overloads designed to protect motors from damage due to overloads, phase loss, and current unbalance.  Available in a wide range of current settings.  Many accessories are available, including stand-alone mounting brackets, connector links, and more.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect mounting to WEG CWB9, CWB12, CWB18, CWB25, CWB32, CWB38, CWBN00, CWBN0, CWBN1 contactors\u003c\/li\u003e\n\u003cli\u003eCurrent Setting Range: 5.60-8.00 Amps\u003c\/li\u003e\n\u003cli\u003eNumber of power poles: 2\u003c\/li\u003e\n\u003cli\u003eAuxiliary Contacts: 1 N.O., 1 N.C, isolated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverload, phase-loss and current unbalance protection\u003c\/li\u003e\n\u003cli\u003eClass 10 Trip Characteristics\u003c\/li\u003e\n\u003cli\u003eIsolated NO and NC auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eManual\/Auto\/Remote RESET button\u003c\/li\u003e\n\u003cli\u003eDirect mounting below Weg contactors\u003c\/li\u003e\n\u003cli\u003eStand-Alone accessory allows mounting anywhere\u003c\/li\u003e\n\u003cli\u003eSelectable Auto or Manual Reset\u003c\/li\u003e\n\u003cul\u003e\n\u003ch4\u003eDocumentation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-RW-flyer-50098643-en.pdf?v=1648522706\" target=\"_blank\" title=\"Weg Thermal Overload Flyer\"\u003eWeg Thermal Overload Flyer\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/WEG-thermal-overload-relays-RW-50070227-en.pdf?v=1648522707\" target=\"_blank\" title=\"Weg Overload Relay Catalog\"\u003eWeg Overload Relay Catalog\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003ch4\u003eAccessories\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBF27-2D: Remote Mounting Kit for RW27-2D and RWB40E Overloads\u003c\/li\u003e\n\u003cli\u003eCSW-BHF437: Overload Relay Reset Button with adjustable shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":42218052321393,"sku":"Weg-RW27-2D2-U008","price":32.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/files\/Weg-RW27-2D-1200Wx1200H_34b4faa6-50c2-47ea-8687-418c86a906d3.jpg?v=1753534135"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/6726\/6673\/collections\/Weg-RW17-1D-1200Wx1200H.jpg?v=1648525386","url":"https:\/\/www.caldwellmotors.com\/collections\/weg-thermal-overload-relays.oembed?page=4","provider":"Caldwell Electric","version":"1.0","type":"link"}